The MIDI-sized Strike a Light™ batak is a full-steel speed and reflex challenge with 12 randomly lit targets, measuring 1.8 × 1.8 metres — compact enough to clear standard doorways yet bold enough to draw a crowd. It sets up in under 5 minutes, runs from a standard 100–240V outlet and has no moving parts, making it an ideal unattended attraction for events and brand activations. The brandable centre panel and optional custom colours, target rings and backdrop turn it into a buy-once, reusable marketing asset. Available in black or white.
A MIDI-sized Strike a Light™ batak speed challenge that tests reflexes, hand–eye coordination and pure reaction speed across 12 randomly lit targets.
Measuring 1.8 × 1.8 metres, this is the slightly more compact version of the full-sized machine — small enough to clear standard door openings and tighter setups, but still big enough to make a statement and pull people in from across the room. Push the start button, then race to hit each target as it lights up at random. The faster you are, the higher your score.
Set up takes under 5 minutes and it runs from a standard outlet on 100–240 volts. With no moving parts, it makes an ideal unattended attraction that keeps working the floor without staff babysitting it.
Why it works on the floor
A reaction wall is a magnet. The lights, the racing clock and the visible scores turn every player into a small crowd, and that crowd becomes your dwell time. People queue, challenge each other and come back to beat their best — which is exactly the engagement window you want for a brand activation, a trade stand or an event. Beyond entertainment, the same speed-and-agility test is used in gyms and by police, fire, Formula 1 and military teams for serious reflex training, so it carries real credibility as well as fun. As a buy-once asset with no moving parts to wear out, it earns its keep activation after activation.
Built for branding
The premium centre panel leaves plenty of room for brand names, taglines or logos, so the machine broadcasts your message while it plays. As options, the standard black machine can be colour-matched to your palette, the targets can wear donut-shaped branding rings, and a full backdrop hooks straight onto the frame for maximum impact. A white finish is also available. The standard back-panel branding area is a simple 1400 × 1460 mm rectangle, so artwork is easy to supply.
Full steel, made to last
This is full-steel, premium-quality construction built to survive event after event. With fast set-up and tear-down and a footprint that travels well, it moves from activation to activation without drama — a durable, reusable attraction rather than a throwaway prop.
Also searched for as a reaction wall, speed wall, reflex wall, reflex game, reaction challenge, reaction test, reaction time game or batak — but the one official name is Strike a Light™.
Available in black or white, with personalisation, custom colours, target branding rings and add-on backdrop available as options. Bigger and smaller versions are also available.
This EC Declaration of Conformity (Annex II.1.A, Machinery Directive 2006/42/EC) confirms that the strike a light - batak - MIDI size speed challenge machine black or white personalized, manufactured by Made for Arcade B.V., Besterdstraat 9a, 5051HH Goirle, Nederland, complies with the relevant provisions of the Machinery Directive 2006/42/EC, EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU.
Harmonised standards applied: EN ISO 12100:2010, EN IEC 61000-6-1, EN IEC 61000-6-3, EN IEC 63000. The technical file is held by the manufacturer at the address above.
Risk assessment for the strike a light - batak - MIDI size speed challenge machine black or white personalized in accordance with EN ISO 12100. Highest residual risk after measures: 2/10 (Low); average 1.4/10 across 9 hazards.
Mechanical crushing / shearing: Moving parts shielded; no accessible crush/shear points during normal use. (residual 1/10)
Service door / access: metal encased PCB with low voltage parts (residual 1/10)
Noise: screws on service door; access for authorised personnel only; (residual 1/10)
Ergonomics: Operating height and forces within ergonomic limits; plug-and-play set-up. (residual 1/10)
Use by public / children: Intended for supervised use; no small loose parts accessible; operator must prevent users from hanging on machine (residual 2/10)
Transport: Intended for supervised use; no small loose parts accessible; operator must prevent users from hanging on machine (residual 2/10)
The Strike-a-Light (Batak) is a reaction and speed-challenge machine: illuminated buttons light up at random and the player presses each one as fast as possible. This manual explains safe use, commissioning, operation, programming and maintenance.
Caution: never leave the machine running unattended, and never run it for more than 10 hours continuously. After a maximum of 10 hours, switch it off (unplugged) for at least one hour.
Disclaimer
Made for Arcade makes no representations or warranties with respect to this manual and, to the maximum extent permitted by law, expressly limits its liability for any failure to conform to any warranty resulting from the replacement of this manual with another. In addition, Made for Arcade reserves the right to revise this publication at any time without obligation to notify any person of the revision.
The information in this documentation contains general descriptions and/or technical characteristics of the performance of the machine mentioned in this documentation. This documentation is not intended as a substitute for, and should not be used to determine, the suitability or reliability of this machine for specific user applications.
It is the duty of such user or system integrator to carry out — in relation to the relevant specific application or use of the product — an adequate and complete risk analysis, evaluation and testing of the products.
Please note: all images used in this manual are for illustrative purposes only and may differ from the actual product. This is because the colours, dimensions and other properties of the actual product may differ from the image.
Made for Arcade and/or its affiliates or subsidiaries are not responsible or liable for any misuse of the information contained in this document. If you have any suggestions for improvements or changes, or have found any errors in this documentation, please let us know.
All relevant national, regional and local safety regulations must be followed when installing and using this machine. For safety reasons and to ensure compliance with the documented system data, the components may only be repaired by the manufacturer.
If machines are used for applications with technical safety regulations, the relevant instructions must be observed. Failure to observe this information may result in personal injury and/or damage to the machine.
This machine is intended for entertainment purposes only. It is not intended for use for profit, for the wagering or payout of money, or for gambling or games of chance. Made for Arcade makes no representation or warranty that the use, installation or operation of this machine is permitted or lawful in any particular region, country, jurisdiction or venue. It is the sole responsibility of the buyer and/or end-user to ensure that their use of the machine complies with all applicable laws, regulations and licensing or permit requirements (including any gambling, gaming or amusement regulations).
This is the English user manual (or an automatic translation thereof). Manuals in other languages may be available on request.
Power supply and surge protection
Arcade and entertainment machines are computer-controlled and contain sensitive electronics. Mains power at events, venues and even ordinary outlets is frequently unstable or “dirty” — voltage spikes, surges, sags and brown-outs, flicker, overloaded or shared circuits, generators, long extension runs and the switching of nearby equipment can all push the supply outside the machine’s safe operating range.
You must always connect the machine through a good-quality surge protector, and — wherever the supply is unreliable or the machine must not lose power unexpectedly — through an uninterruptible power supply (UPS). These sensitive machines cannot tolerate power spikes, surges, brown-outs or sudden cut-offs.
Damage, data loss or malfunction caused by power-supply problems is not covered by warranty. Failure to use adequate power protection can lead to machine malfunction and, in some cases, a risk of fire or bodily harm. If you are unsure about your power supply, consult a qualified electrician before use.
Duty cycle and cooling breaks
These machines are built for event and venue use, not uninterrupted operation. Their motors, power supplies, controllers and lighting generate heat, and running continuously lets that heat build up beyond the safe operating range. Do not run the machine continuously for more than 4 hours. After every 4 hours of use, switch it off completely for at least 10 minutes, by disconnecting the power supply, to let the components cool before resuming.
Overheating from exceeding this duty cycle can cause reduced performance, premature wear, component failure and, in some cases, a risk of fire or bodily harm. Damage or malfunction resulting from continuous operation beyond these limits, or from inadequate cooling breaks, is not covered by warranty. Always keep air inlets and outlets clear and unobstructed.
Support and service
For more information, service, technical support, ordering user manuals, or for any other questions, please contact: Made for Arcade Besterdstraat 9a, 5051HH Goirle, The Netherlands Email: [email protected] · Web: madeforarcade.com
Machine description
The Strike-a-Light is a reaction / speed-challenge machine (a “Batak”). The playing field has several illuminated buttons (usually 8–12) that light up at random; the player presses each lit button as fast as possible. When a button is hit, its light goes out and another lights up immediately. Miss a button, or press the wrong one, and you receive a penalty. The goal is to hit as many correct buttons as possible within a set time. Behaviour can be tuned in the user menu (see Programming).
Intended use
For entertainment use. The minimum age for use is 14; underage players should only use the machine under the direct supervision of a competent adult. Never leave the machine running unattended, and never run it for more than 10 hours continuously — after a maximum of 10 hours, switch it off (unplugged) for at least one hour.
Safety and risks
Operating the machine can involve risk. Before use, make sure everyone involved understands the risks and the machine’s limitations. Operation is never 100% predictable: depending on player behaviour and menu settings, rare situations may need immediate attention from a supervisor. A competent adult must always be able to intervene. Observe all national, regional and local safety regulations.
Remove the Strike-a-Light from the wooden/steel crate (if applicable).
Remove all packaging materials (foam, plastic, cardboard).
Locate the matching remote control — it is used to adjust the settings.
Commissioning (turning on)
The Strike-a-Light runs on 12 V. Inspect the exterior, interior, components and power cord for damage — pay extra attention to loose or damaged parts. Do not connect the machine if anything is damaged. Once checked, plug the power cord into the back/bottom of the machine and into a suitable mains outlet. The machine starts automatically (you may hear a noise during start-up).
Operation
Buttons on the field light up at random; the player presses each lit button as fast as possible. Hitting a button turns it off and lights the next; a miss or wrong press gives a penalty. The aim is to hit as many correct buttons as possible within the time limit. One player progresses through levels (Level 1 easy, Level 2+ harder), or two players use one side each and share a score for cooperative / team play.
Programming (user settings)
Use the remote control to open and adjust the settings menu — each number key maps to a menu item. Most-used keys: 7 = decrease, 9 = increase, 8 = save.
Key
Setting
0
Error sounds on/off. Off = no sound for misses/errors and no penalty for a late press.
1
Round 1 goal — buttons to hit to pass Round 1 (1 correct button = 1 point).
2
Round 2 goal — buttons to hit to pass Round 2 (2 correct buttons = 1 point).
3
Round 3 goal — buttons to hit to reach Round 3 (3 correct buttons = 1 point).
4
Winning score — total points needed to win the game.
Total game time — seconds a player has to complete the game.
7
Decrease the current value.
8
Save / confirm changes.
9
Increase the current value.
(+) / (−)
Volume up / down.
(») / («)
Next / previous music track.
Speaker button (top right)
Turn the music off.
Easy set-up tip: raise the threshold to advance to Level 2 (key 2) so players stay in Level 1, and lower the points needed to win (key 4) below that threshold — the game then ends before reaching harder levels.
Audio / SD card: all audio (music, sound effects, voice) is on an SD card inside the machine. To change the language, music or spoken text, replace the file with your own recording — it must keep the exact same file name and directory as the original.
Maintenance
Service the machine every 4 hours of use, or at least once a week for light use. Visually inspect all internal and external wiring and mechanisms for damage, breakage or abnormal behaviour — energetic play can loosen buttons or pull on cables. Always switch off and unplug before maintenance.
Decommissioning (taking out of service)
Unplug the machine from the mains to disconnect it completely. Do not leave it unattended while connected to power.
Precautionary measures
Supervise the machine at all times with a competent adult who can intervene.
Never run it more than 10 hours continuously; rest it at least one hour (unplugged) afterwards.
Switch off and unplug before any maintenance to avoid electric shock or short circuit.
Do not disassemble, alter or modify the machine without our permission.
Carry out the periodic maintenance above and follow our instructions for anything not covered here.
Specifications may vary or change over time. Verify all specifications prior to purchase. No rights can be derived from this information.
Questions
Can it be branded with our design?
Yes — most machines can be branded by our design department per your specifications. Simply send your artwork and our team will go to work for you, delivering a turn-key custom-branded solution.
Do you provide warranty on your machines?
Absolutely! Each machine comes standard with a 1-year full service and parts warranty at any of our service centers, no questions asked. You can extend warranty to a full 2 years by clicking the option box above (highly recommended). See our T&C for details.
Do you ship to my country?
Yes — for sales we ship worldwide; for rentals we prefer to limit shipping to Western Europe. And if you have your own carrier account (FedEx, DHL, etc.) you can always arrange to have your order picked up from our service centers.
How are products packed?
For trucking, train or air cargo, crating is needed — check the option box above to add the custom wooden protective crating the carrier requires. If you arrange your own pickup, crating is optional and may save you the cost of having a custom frame built.
Can you pre-load our prizes, tokens or content?
Yes — we can pre-load prizes, capsules, tokens or your own media so the machine arrives play-ready for your event.
Is it plug-and-play, or do we need a technician?
Most machines arrive pre-programmed and plug-and-play; setup takes minutes. For live events you can opt to have tech support as back-up per WhatsApp if you ever need a hand — see our service contract for expedited on-call assistance.
