Reaction Ring branding templates, column stickers & carpet
Prepare Reaction Ring branding with artwork for the front and both sides of the centre column, plus an optional 1,200 mm round carpet. Check your designs in a rotatable 3D machine preview.
Admin: confirmed artwork & print files
Start your artwork
Choose a panel. Upload your design. Check the fit.
to change this panel -> upload a new image
Outside cutline size (width × height), excluding bleed.
Pink line: final cut. Keep important details at least 3 mm inside it. The preview includes bleed; the machine view shows the trimmed panel.
All panel dimensions
Outside cutline size (width × height), excluding bleed.
| Panel | Width × height (mm) |
|---|
DO NOT align or adjust artwork to machine features. The dimensions and exact positions of buttons, displays, speakers and other machine features shown in the previews are approximate. Only the outer perimeter of your artwork is fixed.
4. Continue to submission
Happy with your artwork? Continue to enter your details and approve your submission. After you verify your email address, you will receive confirmation and a mockup of your approved artwork. Made for Arcade prepares and retains the production files internally.
Uploads replace the previous file for that panel. Drafts are temporary and expire after one hour of inactivity.
Branding artwork guide
The column uses three separate sticker panels. Upload the front, left and right designs separately, and prepare the round carpet as its own panel. You can preview a black or white frame; the frame colour on your estimate and invoice determines the supplied machine.
For event agencies, exhibition teams and businesses branding a reaction game for their audience.
Panel dimensions and artwork requirements
Outside cutline size (width × height), excluding bleed.
| Panel | Width × height (mm) |
|---|---|
| A - Column front | 230 × 2000 mm |
| B - Left side | 140 × 2000 mm |
| C - Right side | 140 × 2000 mm |
| D - Round carpet | 1200 × 1200 mm |
How to prepare and submit your artwork
- Choose the machine that matches your order and check each panel’s outside dimensions.
- Upload one PNG, JPG or PDF per panel, up to 20 MB. A new upload replaces the previous file for that panel.
- Review the panel placement and rotate or zoom the 3D machine preview. Check the resolution warnings before continuing.
- Enter your name, email address and invoice number. Confirm the verification link within 60 minutes to submit your final artwork.
Machine branding questions
Can I preview my design before placing an order?
You can explore the studio and preview designs without signing in. Final submission asks for your project invoice number and email verification.
Which artwork files can I upload?
Upload PNG, JPG or PDF files, one panel per file, with a maximum size of 20 MB. Supply artwork without instructions or dimension labels.
What resolution should I use?
Aim for 300 dpi at the final print size; 150 dpi or higher is recommended. Lower-resolution artwork triggers a warning and requires your explicit acceptance before submission. Enlarging a small image does not restore missing detail.
Can I align my design to buttons or other machine features?
No. Buttons, displays, speakers and other machine features are shown approximately. Only the outside artwork contour is fixed. Do not align or adjust your design to those features.
Will I receive production PDFs?
You receive confirmation and a mockup of the approved artwork. Made for Arcade keeps production PDFs and cutting files internally for printing.
When is my artwork submitted?
Your artwork is submitted only after you click the verification link emailed to you. The link expires after 60 minutes; unconfirmed submissions are deleted.
When does the branding lead time start?
If payment for your invoice has cleared, the standard 21-day branding lead time starts when you verify the final submission. Otherwise, payment clearance is still required.